Info: 'Click on the left arrow to move the screen one step to the left and right arrow to move the screen one step to the right. The maximum deviation from the original setting is 7 clicks to the right and 7 clicks to the left.'
2:
Bounds: x1=22, y1=194, x2=255, y2=245
Type: -120
Info: 'This program supports Quadra Built-in Video and the following RasterOps boards:1. 24STV, MediaTime2. 364, 264, 24S, 24si, 24Sx '
Info: 'Click the ‘Save’ button to save the settings in the PRAM which will be used to set the screen position on next reboot. Click the ‘Revert’ button to revert to last saved settings.'
7:
Bounds: x1=22, y1=299, x2=256, y2=352
Type: -120
Info: 'Note: The ScreenShift INIT uses the numbers saved by this application to adjust the screen on bootup. It adjusts the screen only if the board present is the same as the one when INIT was last executed. '
8:
Bounds: x1=22, y1=353, x2=253, y2=392
Type: -120
Info: 'If the boards were swapped or the INIT was copied to the System folder for the first time, shifting will not take effect.'